Skip to main content

Making Your Own Oils



Reed diffusers are decorative air fresheners for the home that work with scented oils and reeds. The oil travels up the reeds to release their fragrance into the air around them. No need to use aerosol sprays, light candles or plugin air fresheners, the process handles itself naturally.
They’re very popular since you can choose from an endless amount of fragrances, have no open flames (candles) to worry about and they don’t plugin so no dangling cords to hide or fuss with. If you’d like to try making your own (a perfect way to customize your favorite scents), here are some tips and recipes showing you how to do that.
Make Your Own Reed Diffusers And Oils With A Few Simple Ingredients
  • Choose glass bottles and vases that have a small opening at the neck and that compliment the room you are placing it in. You can use a clear glass container or one that’s decorated, the choice is yours. The reeds you use should be at least double the height of the glass container.
  • You can purchase a package of reeds that are marketed for reed diffusers (they’re fairly cheap) or try thin bamboo skewers, they work just fine too.
  • Pour a liberal amount of scented reed diffuser oil in the glass container then stick the reeds or bamboo skewers inside. After about an hour, turn the reeds over so the other end can wick up the oil, this will help speed things up.
  • Position the reed diffuser in a location that is not near electrical appliances (in case of spills) and won’t be in danger of being accidentally knocked over.
  • After first filling the reed diffuser with fragrant oil, give the reeds a chance to soak up the oil, soon you’ll be able to enjoy their light fragrance.
That’s all it takes to make your own!

Making Your Own Oils

You can make a homemade version of reed diffuser oil with just a few simple ingredients that you can easily find locally.
  • Mineral Oil, Sweet Almond Oil or Safflower Oil: Select a combination of your favorite essential oils and add as many drops to the carrier oil (Mineral Oil, Sweet Almond Oil or Safflower Oil) as you need to achieve the fragrance you’re after (a good amount to start with is about 12 drops of EO per 1/4 cup of oil). Next add a splash of vodka to help the oil travel up the reeds better. You could also mix the carrier oil with your favorite perfume instead of essential oils (no addition of vodka will be necessary if using perfume).
  • Vodka, Essential Oils & Water: Mix approximately 12 drops of essential oils with 1/4 cup of water then add a splash of vodka. The alcohol helps the essential oils bind with the water. This method will evaporate faster than using oils, but still works.
  • Liquid Potpourri: Liquid potpourri can be used in place of reed diffuser oil, you should be able to find this in the candle or crafts section of a department store (like Walmart).

Tips

  • Rotate the ends of the reeds or skewers once a week to refresh and prolong the fragrance.
  • Experiment with different scents and when you find a favorite combination, keep notes of the amounts of essential oils and carrier oil used so you can duplicate it next time. These make nice gifts too (with attached “recipe” card).
  • Once you find a favorite recipe for the scent, double or triple the batch and keep the excess in a sealed glass jar until needed. This will save time as well as keep a ready supply of diffuser oil on hand.
  • The smaller the opening at the neck of the glass container the better, this will force the oils to travel up the wick to diffuse their scent rather than evaporating up through the neck.
Labels:

Popular posts from this blog

Vertical Lube Oil Pumps (Model VCRE)

Lube oil pumping applications demand a pump that provides reliability and extended service life with a minimum of maintenance. The typical Lube Oil pump must also be capable of operation over a wide range of temperature and liquid viscosity conditions. The VCRE family of pumps is designed specifically with these requirements in mind. The VCRE lube oil pump is a vertically submerged pump that utilizes an ANSI standard hydraulic construction, enclosed bearing housing, and welded piping construction which eliminates the inherent maintenance and leakage problems associated with other pumps. During operation, axial and radial thrust loads are controlled by Buffalo’s exclusive modified casing volute and impeller design.  is backed by extensive field-proven experience in designing pumps to handle any lube oil application. This experience also provides flexibility in assisting OEM’s contractors and end-users in designing a sound instal...
Read more

Motorcycle Shaft Drive Grease

General Purpose Grease Grease has several uses on a motorcycle. It's there to protect parts from water, to keep rubber and plastic seals from drying out, and to provide lubrication. Generally speaking, grease is just a reduced fat. In fact, you can find several companies who call their grease bases "soap." The choice for a general purpose grease to protect from water, keep seals moist, and provide lubrication is easy. If you're going to do your own maintenance, I recommend you get Mobil-1 or Valvoline synthetic grease for general purposes, about $6 / pound anywhere. This stuff can handle temperatures higher and lower than you'll ever get near. A one pound jar should last you about 15 years. Shaft Drive Gear Maintenance There are two types of maintenance you must do on a shaft drive bike. At your rear wheel there are pinion gears where the spinning drive shaft motion is turned 90 degrees into the rear wheel motion. These gears are bathed in oil which much be c...
Read more

Understanding Ferrous Density

As part of my job, I regularly present oil analysis training seminars. One of the tests we discuss is ferrous density. I find that this test is seldom well understood, and, probably as a result, is seldom used. Explanation of the Test Ferrous density is the density of ferrous, or more correctly, of ferromagnetic particles distributed in the oil. The other ferromagnetic elements that one might encounter in lubricated components are nickel and cobalt, but in practice, these elements are likely to be present only in comparatively small quantities. Therefore, we are effectively measuring the concentration of magnetic steel alloys. There is no single way to conduct a ferrous density analysis. There are many ways of performing this rather essential test. Perhaps the two most common are the direct-reading ferrography, a technique which uses light blockage analysis of material deposited on a glass slide; and electromagnetic induction, which measures the voltage induced in a current-carrying ...
Read more