Skip to main content

Gas and Oil

Gas and Oil

Posted: 15 Nov 2009 02:56 AM PST

Numbers down so far this pricing session

Here's what I have as we drift along this pricing session.

Remember that the winter heating oil blend has changed with the addition of jet fuel as part of the mix. That means that the heating oil number consists of 75 per cent jet fuel and 25 per cent of number two type oil (stove oil) so, when I quote that number, it can only be used as a possible indicator of where heating oil could be going.

The stove oil number remains the same all year round. The quote you'll see from here on until April month still applies.

With twelve days of data out of a possible fourteen days needed in order to predict the final number, it certainly looks like a drop in prices will be forthcoming this coming Thursday morning for all fuels. Here's what I have so far, keeping in mind that the next two business days will determine the final result but, all indications from the markets are that the drops in pricing should be slightly more than what I have here.
  • Heating and stove oils are down by 1.48 cents per litre.
  • Diesel fuel is down by 2.0 cents per litre, and...
  • Gasoline shows down by 2.5 cents a litre.

I'll be posting a press release here this coming Tuesday night, close on 11:00 PM Newfoundland time that will have the final predicted drops to come.

Regards,

George

Popular posts from this blog

Vertical Lube Oil Pumps (Model VCRE)

Lube oil pumping applications demand a pump that provides reliability and extended service life with a minimum of maintenance. The typical Lube Oil pump must also be capable of operation over a wide range of temperature and liquid viscosity conditions. The VCRE family of pumps is designed specifically with these requirements in mind. The VCRE lube oil pump is a vertically submerged pump that utilizes an ANSI standard hydraulic construction, enclosed bearing housing, and welded piping construction which eliminates the inherent maintenance and leakage problems associated with other pumps. During operation, axial and radial thrust loads are controlled by Buffalo’s exclusive modified casing volute and impeller design.  is backed by extensive field-proven experience in designing pumps to handle any lube oil application. This experience also provides flexibility in assisting OEM’s contractors and end-users in designing a sound instal...
Read more

Motorcycle Shaft Drive Grease

General Purpose Grease Grease has several uses on a motorcycle. It's there to protect parts from water, to keep rubber and plastic seals from drying out, and to provide lubrication. Generally speaking, grease is just a reduced fat. In fact, you can find several companies who call their grease bases "soap." The choice for a general purpose grease to protect from water, keep seals moist, and provide lubrication is easy. If you're going to do your own maintenance, I recommend you get Mobil-1 or Valvoline synthetic grease for general purposes, about $6 / pound anywhere. This stuff can handle temperatures higher and lower than you'll ever get near. A one pound jar should last you about 15 years. Shaft Drive Gear Maintenance There are two types of maintenance you must do on a shaft drive bike. At your rear wheel there are pinion gears where the spinning drive shaft motion is turned 90 degrees into the rear wheel motion. These gears are bathed in oil which much be c...
Read more

Understanding Ferrous Density

As part of my job, I regularly present oil analysis training seminars. One of the tests we discuss is ferrous density. I find that this test is seldom well understood, and, probably as a result, is seldom used. Explanation of the Test Ferrous density is the density of ferrous, or more correctly, of ferromagnetic particles distributed in the oil. The other ferromagnetic elements that one might encounter in lubricated components are nickel and cobalt, but in practice, these elements are likely to be present only in comparatively small quantities. Therefore, we are effectively measuring the concentration of magnetic steel alloys. There is no single way to conduct a ferrous density analysis. There are many ways of performing this rather essential test. Perhaps the two most common are the direct-reading ferrography, a technique which uses light blockage analysis of material deposited on a glass slide; and electromagnetic induction, which measures the voltage induced in a current-carrying ...
Read more